Відео

I would of had the door open outwards

Cleaning the socket box out like a real plasterer should do. As an electrician I have no issues with smashing all the muck out with my claw hammer to make sure the plasterer needs to return if he fouls my work by leaving back boxes full of muck. 👍🏻

Pretty decent I think I’ll copy you if you don’t mind

I understand a coat of PVA is necessary on the bonding if multi finish plaster is used. Is it really needed when filler is used?

you can't mig weld with that. only stick welding or basic tig welding

Stopped for M&S Foodhall, I thought they ate raw roadkill

I am preparing myself for a DIY job to lay a new carpet and watched quite a number of videos how to do it. But here I like the fact that you are yourself not a professional and show your mistakes so for DIY person it is good to know them and keep in mind. Thank you 🙏

Des pre 1990 they put asbestos in Lino tiles flooring and mixed it with cement just but a few things it was in Great video as usual and love your work 👍

A longer pry bar will make light work

I'm marking the route of cables on the boards so it will be obvious in future as some are in cut channels in the top of the joists immediately covered by the floorboards.

Same thing would happen if this is the first time you bleed a car brake

I would love to hear your commentary while reviewing your purchases. I recall enjoying your enthusiasm when checking out that tripped up van or that scooter ride. Thanks for providing an excursion from the news & politics. ❤

i love pigeons as pets, why do you have to kill them😢😭

Des get yourself a 1000volt jackery Great video mate 👍

That looks lovely and relaxing Des. Great work

Great clip, thank you. Can I ask what electric heaters you installed as looking to remove the old storage heaters in my new flat. Thanks

Tilley should send you a free hat for loving the hat so much. I think the reason for destruction of the old hat is to prevent someone else to claim warranty with that hat. Because they also said Tilley will not ask you how you get the hat. They will be smater by just asking you to mail the old one back. Well, after all, they still honored their warranty.

Thanks for the OCD video.

many thanks, you made that look very easy, I will try some of your tips tomorrow as we've a whole house to rewire and scim,

B&Q do a 5ltr pressure sprayer for £26, made in EU not China, much better quality! Goes under their brand name Verve.

I have a T4m0 hikers hat by Tilley. the original was made in Canada. It was an awesome hat for about 8 years. The fabric started breaking down so filed claim. Tilley done great on that part . You do have to destroy old hat and. Pay a 20.00 shipping fee. Once I got new hat the color the brim even material is off it looks like a seconds hat or knockoff off looked closer it was. Made in China. Not Canada anymore. The quality you can plainly see the difference. Very disappointing. The original was awesome but the replacement is not. I reached out to Tilley about being unsatisfied. They said oh our hats are made in China and other manufacturers to strict standards and quality. That I am wrong my hat isn’t defective and they only sell the highest quality. Not great customer service so I put a 1 star review and uploaded pictures side by side the destroyed hat still looked better than the new one! I never post a bad review on anything without first seeing if company will make it right ! In this case the customer is wrong and they’re right. So buyers beware I highly suggest check local stores if they have the Canada made hats there you might find a great hat. But these new Chinese made ones aren’t worth 120.00 not even close!

Would you buy these chairs if you knew they would be left outside in all weathers. Strange question but where did you buy the shorts from because i'm looking to buy 3/4 shorts but they don't sell them in my town.

Afternoon Des, watched your video yesterday and I meant to ask, how is the roof holding up 4 years on? I’ve got a flat brick shed roof that needs new wooden beams due to rotting plus certain areas the roof panels need replacing plus obviously the felt. Oh and a new door frame, I’m not too bad at DIY but I’m a bit nervous about doing it

How to put it back

Great video, not just of the device, but tge applications too. Very useful! Would love to see or understand why it wasn't hooked up to hoover

Was is it comfortable? I have fond memories of sleeping on army cots while platform tenting with the family back in the 60's. There were 8 of us. Fun times.

Is there a reason for no dialogue, missed your opening greeting?

Can you put a link up please 👍🏼

Would be cool to see how edc fits into the proteus. Great kit

I would have done a rabbit and internal bead. If the window needs replacing, it will be easier to do.

Thank you, a very detailed demonstration! Now, any old pie-brained dickhead with a wallet full of condoms way past the sell-by date, like me, can do it...

Brilliant video, thanks! I just saw it too late , already got an Harris roller, already failed to find any instructions on the site, already realised that the blocking mechanism doesn't work.

the saw cuts a few mm so you shouldnt measure all cuts pre cut. otherwise great work!😀

Thank you! Off to cut the grass now!

Love those ceiling "Jack's",, 👍👍

Can't believe this two ton shed is resting on a few breeze blocks and a handful of gravel, straight onto soil,, 😂😱🤣

Is this a "how not to video",,?? 🤣🤣,

Brilliant, great help, and used to build horizontal fence. Thank You

It’s first come first served on the pumps

Never expose your inner legs and center part of your body to the angle grinder cutting line. You have huge arteries running on inner side of your upper leg. Always have your body on the left or right side of the grinder cutting line. Use a full face shield or motorbike helmet or what ever you have. The proper tool for this would be a skill saw 7.25 inch, the blade can cut 2x deeper and would cut this in 2 cuts.

So strong and brave blocking all the fuel pumps on purpose

Thank you. This video just helped me put my machine together appreciated

I just got one today also. Do you run it off a 13amp plug or use the blue plug?

How did you do the corner trimming?

Would u need to wait for the pva to dry

Maybe if you had kept the cardboard boxes from the chips and used that to heat the log it may have caught!

Wow I didn't realise how strong and brave they are !

Hell's Angles --- powered by Wild Bean Cafe 😂

Jolly boys outing as long as the van don’t blow up like del boys lol👍👍 Hanging round the loos with a camera not good look hehehe 😂😂😂😂😂

Great road trip matey!! Looking forward to the next one!!😀